This item has been discontinued.
Use our easy measure, no template system for a custom fit, curved rod that will work beautifully for your curved window treatment.
Measurement Guide For Bow Windows
All measures are "back wall", and we will take deductions for bracket projections to calculate the correct rod size. Please locate where you want the rod to end (not including the finials) on the wall at either end of the bow window. Then pull a tape or string tight between these two points and measure the distance. Now find the center of this distance (on the straight line), and measure the distance from this halfway point to the wall. Be sure this is measured at a right angle (90 degrees). We suggest using a note pad or business card to help, by placing one edge on the straight line width, and then following the adjoining edge to the wall.
NOTE: Curved walls usually have some imperfect curved areas. Your bow rod will be a perfect curve to your measures for best appearance. This means the rod will not exactly match the wall in all areas, but it will follow the over-all curve by averaging the variations over the width of the wall.Required Measurements
W = Width (Straight line distance from each rod end, not including finials)
H = Height (Distance from center of W to the wall, at a right angle to W)Suggested Additional Measurements:
For rods using more than 3 brackets for support, please provide the
locations where brackets will be located so seams/joints can be located at these points. This gives the best
support, as we use our patented coil connector to internally splice the rods for easy installation and perfect fit.
While we curve the rod in our factory in one piece, we seam the rod so that it can be more easily handled and
to minimize shipping charges. Simply draw your wall and show the locations of the brackets with the distances
between them, noting if the distance is on the curve or straight line (preferred).
To view other items in this category (Click Here)
To view other items from this manufacturer (Click Here)Dimensions:
Custom x 7/8" to 1-1/8" diameter (Depending on finial - Selections shown below)Material:
All drapery rods, brackets and rings have scratch resistant baked matte finish in black or brown or may be hand-finished in your choice of custom colors for an extra charge. - To see options please select view option tab.Contains:
Doe not include brackets. Please be sure to order them separately.Ships:
Shipping in 7-14 Business Day's (Hand-Crafted in the USA)
This exciting line of drapery hardware, inspired by 18th and 19th century European ironworks, is hand crafted and hand finished to order. Drapery rings and brackets are normally in stock in black & brown and ship in 3-5 days. All other items are hand crafted and/or finished to order. RUSH
delivery is available for an additional charge
If you have questions or would like to check availability on an item please call 866-Get-Iron or email us.Note:
Estimated shipping times are listed on each product in our site, and are also given when your order is confirmed. Please remember that these delivery time frames are "estimated". We do our best to expedite your shipment but we can not guarantee the amount of time it will require each respective manufacturer to produce your order.
Please be patient - the quality and selection are worth the wait.
If you have a time sensitive requirement, please call us.
We will do out best to work with you however we can.