Amore Decorative Drapery Hardware

This exciting line of drapery hardware, inspired by 18th and 19th century European ironworks, is cast and welded in recycled iron and aluminum then hand finished to order.
  • All drapery hardware is custom made to order in a wide selection of hand-painted finishes.
  • Some limited customization is available for an up-charge in price.
  • Rush shipping is available for an up-charge in price
More Information Made to Order



1" Adjustable Drapery Rods
w/o Finials

$100.00
7/8" Adjustable Drapery Rod
w/o Finials

$100.00



LIFETIME WARRANTY
First year - Free replacement of any product due to workmanship or defect when returned freight prepaid.

Second and subsequent years - replacement of any product due to workmanship or defect at one-half of the current retail price, plus shipping, when returned freight prepaid

COLOR SELECTIONS
Drapery rods, brackets, and rings have baked-on scratch resistant matte finishes. Colors of matte brown and matte black are available. Finials, holdbacks, crowns, and scarf holders are usually ordered in our wonderful hand-painted special finishes for a handsome weathered look. Special finishes have multi-layers of paint and therefore may vary due to their unique hand-painted characteristics, although great effort is made to insure all items ordered at one time will be consistent (similar to fabric dye lots). Always use extra care when handling any special finished product.

DRAPERY RODS:
Drapery rods, brackets and rings have baked-on scratch resistant matte finishes. Colors of matte brown and matte black are available. Finials, holdbacks, crowns and scarf holders are available in wonderful hand painted special finishes for a handsome weathered look. Special finishes have multi-layers of paint and therefore may vary due to their unique hand painted characteristics, although great effort is made to insure that all items ordered at one time will be consistent (similar to fabric dye lots).

Rods are sold as complete sets for your convenience. Each set includes finials, adjustable rods, standard brackets, and screws. For your further easy handling, most finials are welded to the telescoping, heavy gauge rods. The interconnecting sections used for LG are X-LG rods offer easy handling and lessen freight charges by shipment with UPS. For any order, please specify the bracket projection so the proper brackets will be supplied with your rod. Projections of 1.5", 3", and 6" are available. Standard 3" brackets are normally used for most window treatments.

DRAPERY CROWNS:
Crowns are offered in any of the hand painted special finishes. Please specify the color desired. Crowns have three types of mounting systems available. Specify one of the following when ordering:

A- Adjustable mounting brackets for projections of 4.5" to 7" from the wall. Small crowns mount with a single center support. All other crowns have brackets on each side, except the 2940, which has an additional center bracket. Use this crown for mounting over windows or beds when fabric is be swagged or used in combination with a rod.

T- When the crown is to be mounted to the top of a wooden dust board of an upholstered cornice, order the crown with a "T" type of projection. The mounting bar(s) is usually located on the backside near the bottom of the crown. Screws secure the bar to the top of the wooden dust board.

F- Crowns may also be ordered with an "F" for flat or flush mounting against a wall. Use this type for mounting over a doorway, over a mirror or window when no fabric is to be draped. A hanger is provided on the backside of the crown to mount flush to the wall. Aluminum crowns may also be drilled and screwed flat to the wall should a more permanent mounting be desired.

Crowns are only available for the unique design in the size specified for that design.

HOLDBACKS:
All holdbacks have adjustable projections of 4.5" to 7" from wall. Fluer de Lis, Rosette and shell styles have a single projection to attach to the wall. All other styles have one adjustable projection for mounting to the wall and an additional 4" rod at the opposite end to allow fabric to be "held back" within the decorative casting. All holdbacks are available in pairs only and are offered in any of the special hand painted finishes.

SCARFHOLDERS:
All scarf holders have a single mounting bracket for adjustable projections of 4.5" to 7" from wall. Designs priced in pairs may be ordered in pairs only. Other designs are sold each piece and priced each. Scarf holders may also be used as holdbacks due to their design.

SCARF DECOR RINGS:
Use one or several scarf rings on any diameter rod up to 2" to hold decorative scarf swags. Each ring is 2.5" ID to hold most fabrics and fabrics with trim. For lighter weight fabrics, wrap around the ring one or two times. These really make an ordinary rod simply stunning!

SCARF DECOR BRACKETS:
These pieces make scarf treatments easy. Each mounts directly to the wall with the welded bracket attached to the back of the ring.

DRAPERY ACCENTS:
Use these to hold scarfs over windows or to hold back a drape. Another wonderful look is to pull back the side panel from the lower left corner and secure on this decorative hook.

BUTTERFLY & ANGEL RINGS: (patent pending)
Use butterfly tings to create a wonderful ceiling canopy over any size bed. Also use to mount fabric to any wall over a window to create rosettes, bows, or bishop sleeves, or for a decorative room boarder around a ceiling. The Acanthus butterfly ring may also be mounted to the ceiling to add a decorative addition to a fabric canopy. Angel rings may be hung onto any decorative hook or scarf holder to create rosettes, bows and other designs with a scarf fabric.



Amore Drapery
Amore Drapery - Inset