Adjustable Drapery Rods by Amore

Adjustable Drapery Rods by Amore

The interconnecting sections used for LG and XL sizes offer easy handling and reduced UPS shipping charges. For sizes beyond the XL size, simply order extra extension tubes and brackets, which also ship UPS.

For any order, please specify the bracket projection so the proper bracket will be packed with your rod. Projections of 1-1/2", 3" and 6"” are available. Standard 3" brackets are normally used for most window treatments. Use 1-1/2" projection brackets for wall hangings or tapestries. Use 6" projection brackets to clear outside mounted blinds or sheers. Heavy-duty brackets may be ordered separately as an upgrade for use with extra heavy drapes on the adjustable rods.

When using rings, we recommend the additional purchase of a rod sleeve (page 33) to eliminate the "lip" of an adjustable rod. The "lip" will interfere with the smooth operation of rings on the rod. Of course, for tab tops, rod pockets or stationary side panels using rings, sleeves are not necessary as the lip may often be covered by the window treatment. Sleeves fit over the adjustable, smaller diameter section of rod and are cut to the exact size needed, either at the job site by the installer or at our factory when ordered for an extra charge. After sleeves are installed, the rod will have a uniform diameter from finial to finial and will not have a "lip".

DESIGNER TIP: Use Adjustable Rods for rod pockets or tab top drapes, where the "lip" of an adjustable rod and any rod seams may be hidden by the pocket or tab. For traversing rings, use the Custom Rod program, as the cost is about the same as an adjustable rod plus rod sleeve, and you will have a better appearance than the adjustable rod as the brackets will hide seams and there are no "lips" to hang-up the rings.