Amore Centerpiece Collection

Make your rods extraordinary with an embellishment from our Centerpiece™ Collection. The designs fit into 1”, 1 ½” and 2” drapery rods with included, installer-friendly slip-on internal metal sleeves to become a structural element of the rod, supported only by the drapery rod’s brackets.

Mix and Match the Centerpiece™ with any rod (smooth or twisted) and any finial style. Most Centerpiece™ designs are also available in the Crown Masterpiece™ and Medallion™ Collections (for holdbacks or scarfholders) with many mounting options for carrying out a consistent, unified hardware theme.

Each design is custom fitted to your location on the rod, or will be centered on the rod if not specified. We suggest providing a drawing of all windows and wall distances, with where you plan to locate your rod to insure a perfect fit. Available in all of our hand-painted Special Finishes.



Centerpieces™ have a patent-pending connector to join the piece to any of our custom rods. The joiner assembly for each end of the Centerpiece™ features a ring stop. Each ring stop is just larger than the diameter of the rod, and prevents rings on the rod from sliding onto the design or finial. Sizes given above do not include the ring stop width on each side of the Centerpiece™. Ring stops are ¼” wide each side for 1 and 1 ½” diameter rods, and 3/8” wide for each side for 2” diameter rods. However, when ordering rods for the Centerpiece™, measure the entire size of the rod with Centerpiece(s)™, from base of finial to base of finial (ie, do not deduct for the Centerpiece™). For example, a Centerpiece™ in the middle of an 96” rod (excluding the finial sizes) would be ordered as a 96” rod, the Centerpiece™, the finials, and the rod brackets. We make all the deductions and allowances for the connectors so you get a perfect fit.